Home Jacksonville's Largest & Most Respected Spray Foam Insulation Company

Call for a Free Estimate
888-306-3626

Energy Seal Foam Insulation BBB Business Review

Spray Foam Insulation Benefits

There is no better home insulating material that can seal your home from air and moisture intrusion, save on costly utility bills, strengthen your home, and protect your family's health from dangerous mold, airborne pollutants, and allergens than Spray Foam insulation.

Benefits of Spray Foam Insulation

  • Stops air and moisture infiltration
  • Makes your home more comfortable
  • Saves on energy costs
  • Adds strength to the building structure
  • It is permanent and will not sag
  • Keeps dust and pollen out
  • Reduces capacity requirements, maintenance and wear of HVAC equipment

Spray Foam Insulation Redefines Traditional Construction Methods

And Benefits Modern Building Sciences and Energy Efficient Green Building Initiatives

Read all about how spray foam used in the Building Envelope outperforms fiberglass insulation, becomes a superior air barrier, and defies traditional, and perhaps, outdated building practices of attic and crawl space ventilation.

SPF Saves You Money and Pays for Itself

SPF home insulation saves on energy costs and lowers utility bills. SPF is used to seal the entire "building envelope" of your home to prevent air and moisture infiltration. The US Department of Energy (DOE) studies show that 40% of your home's energy is lost due to air infiltration. This air infiltrates the home in the form of drafts through walls sockets, windows and doorways.

Often times no expensive building wrap or additional vapor protection is required during construction when using SPF, saving money yet again.

High R-Value

Sprayed polyurethane foam has an aged R-value of approximately 6.0 per 1 inch thickness (depending on the particular formulation and application, higher values have been achieved), enabling it to provide more thermal resistance with less material than any other type of commercial insulation material. SPF systems are frequently used to insulate and protect a wide variety of residential, commercial, and industrial buildings

Contact Energy Seal today for more information regarding our spray foam insulation services and learn how you can save money on heating and cooling bills immediately! We encourage you to read our spray foam insulation reviews and learn more about all other types of insulation before you decide what to use in your building project.

Spray Foam Insulation

Additionally ...

Monthly energy and utility savings of 30% or greater can be achieved when compared to the alternative roofing and insulation systems. The cost of an SPF roof or insulation system can often be recovered in less than 5 years, simply through energy savings alone.

Prevents Air, Moisture and Gas Infiltration
Studies have shown that as much as 40% of a building's total energy loss is due to air infiltration. Traditional fiberglass insulation is only stapled, or placed into the wall cavities and does not seal the stud and wall cavities from end to end, or top to bottom. Air infiltration can pass through these gaps, making it far less efficient than SPF. SPF not only adheres to, but forms to the walls and floors to create a tight seal and insulating barrier that stops this air leakage. SPF also boasts the highest R-value per inch than any other commercial material, (upwards of R-7.0, compared with Fiberglass at R-3.5) making your home more comfortable and less expensive to heat in the winter, and cool in the summer.

Since SPF acts as an air barrier, it also helps to reduce moisture infiltration, which is a source of dangerous mold and mildew growth in the home, and can cause severe health problems to its occupants. So save your family and save money at the same time with SPF home insulation systems. Moisture infiltration can also cause structural damage to your home or building.

Helps Reduce Moisture and Mold
Molds produce tiny spores to reproduce. Mold spores waft through the indoor and outdoor air continually. When mold spores land on a damp spot indoors, they may begin growing and digesting whatever they are growing on in order to survive. There are molds that can grow on wood, paper, carpet, and foods. When excessive moisture or water accumulates indoors, mold growth will often occur, particularly if the moisture problem remains undiscovered or un-addressed. There is no practical way to eliminate all mold and mold spores in the indoor environment; the way to control indoor mold growth is to control moisture. SPF insulation is the key.

Enhances Overall Building Stability
Since SPF is seamless and monolithic, foam sprayed into the walls enhances overall building stability and reduces "rack and sheer."

Deadens Sound Travel and Noise
SPF also reduces airborne sound making the home acoustically tighter and more private from room to room.

Professional Affiliations

Contact Info

Energy Seal, Inc.
7380 Phillips Highway
Jacksonville, FL 32256
Phone: 1(888) 306-3626
Email: info@EnergySealJax.com

Find Us On Facebook

Spray Foam Insulation

**Special Internet Offer Save 10%**
Applies to all customers with
2000 ft2 or greater of coverage.
This cannot be used in conjunction with any other offer.

| About Energy Seal | Insulation Services | Bonus Rooms & Subfloors | About Spray Foam | Benefits of Spray Foam |
| Spray Foam FAQs | Blown Fiberglass | Contact | News | Testimonials | Sitemap | Home |

©2012 Energy Seal, Inc.

Website by Lisa Day Burbaugh, NSBWebEffects.com